Fisher & Paykel Error Codes

Find troubleshooting guides for all Fisher & Paykel error codes.

3 error codes across 1 appliance types

Washer

Code	Meaning	Severity
EDL1	The Electronic Door Lock circuit either failed to engage or the control board can't verify the lock actually engaged. The '1' just means it's the primary lock fault, not a secondary or intermittent one. moderate	moderate
EDL2	The EDL2 error code indicates a failure in the electronic lid lock mechanism, specifically that the motor controller cannot confirm the lid is successfully locked after multiple attempts. high	high
F1	F1 is a Pressure Transducer Fault. The motor control module is reading a voltage signal from the water level sensor that's either too high, too low, or completely flatlined. Basically the machine can't tell if the tub is empty or about to overflow, so it refuses to run. high	high