Warning: Disconnect power before servicing.

Don't replace it. Fix it.

Expert-verified error diagnostics, teardown guides, and OEM part fitments. Find out exactly what is wrong with your appliance and how to repair it safely.

Select Your Brand

View All Brands →

Trending Error Codes

Browse Library →
GeRefrigerator

PF Code: GE Refrigerator PF Code Reset

PF stands for Power Failure. The control board detected that its power supply got interrupted, either briefly or for a long stretch. It's not a mechanical fault, it's more like a notification light that stays on until you tell the board you've seen it.

Difficulty: beginnerAvg Cost: No parts needed
ElectroluxRefrigerator

HI Code: Causes and

The HI alarm fires when the internal sensors detect the fresh food section climbing above 55°F, or the freezer going above 20°F, for an extended stretch. The control board is basically saying the cabinet can't hold temp and something's preventing it from cooling down properly.

Difficulty: intermediateAvg Cost: No parts needed
WhirlpoolWasher

DD-NOT-SPIN Code: Fix

When a direct drive washer won't spin, something in the mechanical drivetrain has failed. Unlike belt-driven machines, there's no belt to check. The motor connects directly to the transmission through a plastic coupling and a mechanical clutch. When either of those breaks, the motor spins freely but the basket doesn't move.

Difficulty: intermediateAvg Cost: No parts needed
ElectroluxRefrigerator

ELECTROLUX-RESET Code: Electrolux Refrigerator Reset Procedure

When the control board takes a voltage hit or loses communication with a sensor mid-cycle, it sometimes just gets stuck. The reset clears all the temporary memory registers on the main PCB and forces every component to re-announce itself on startup. Think of it like rebooting your router. Same idea, just colder.

Difficulty: beginnerAvg Cost: No parts needed
FrigidaireRefrigerator

SY EF Code: Evaporator Fan Error Fix

The evaporator fan motor sits in your freezer behind the back panel. It's supposed to spin and send a speed signal back to the main board continuously. When the board doesn't get that signal, or gets something unexpected, it throws SY EF. A dead motor, frozen blade, or broken wire in the harness will all trigger it.

Difficulty: intermediateAvg Cost: No parts needed
FrigidaireRefrigerator

PF Code: Meaning and Reset

PF stands for Power Failure. The control board monitors the incoming 120V supply constantly, and the second it drops out or gets interrupted, even for just a half second, it logs it and throws this code on the display so you know it happened.

Difficulty: beginnerAvg Cost: No parts needed

The era of the disposable appliance is over.

Manufacturers lock repair manuals behind paywalls and design machines that throw cryptic codes to force $150 service calls. We believe you have the right to repair the things you own.

Browse All Error Codes
2.1K+
Verified Fixes
$2.2M
Avg DIY Savings