Quick Answer
You can find your Kenmore 665 model number on a sticker inside the door frame or on the side of the inner tub. The 665 prefix is a manufacturer code indicating the unit was built by Whirlpool, fitting standard 24-inch wide cabinet openings.
Here's why this matters: if you don't have the full model number when you call the parts house, you're gambling. I've seen people order the wrong pump seal three times in a row because they just said 'Kenmore 665 dishwasher.' The numbers after that prefix narrow it down to your exact machine. And since it's Whirlpool-built, you've got a ton of parts options, which keeps costs way down.
KenmoreDishwasherSeverity: low
Kenmore Dishwasher Model 665 Dimensions & Identification
So you've got a Kenmore 665 and you need to figure out what it is, what fits, or what it measures. Good news: these are probably the easiest dishwashers to find parts for in the whole country. That 665 prefix basically unlocks the entire Whirlpool parts catalog for you. I've pulled parts from Whirlpool, Maytag, even KitchenAid bins to fix these things. Standard 24-inch opening, pretty forgiving install.
What are the standard dimensions for a Kenmore 665 dishwasher?
Most 665 series units are 23.875 inches wide, fit a 24-inch rough opening, and run about 34 to 35 inches tall depending on where you set the leveling legs. Depth is typically 24 inches, give or take. Add a couple inches for the door handle when you're checking clearance in front of the machine. Honestly these dimensions have been consistent across the 665 line for decades, so if your kitchen has ever had a built-in dishwasher before, there's a really good chance this one fits without any modification at all.
Who actually makes the Kenmore 665 dishwasher models?
Whirlpool builds them. That's what the 665 prefix means. Kenmore doesn't have factories, they're basically a brand that contracts manufacturing out to companies like Whirlpool, Frigidaire, and LG. So when you call a parts house and they seem confused about your Kenmore, just say Whirlpool-built and give them the full model number. Parts from Whirlpool, Maytag, and KitchenAid dishwashers of the same era will often cross over. That's a huge deal because it keeps your repair options wide open and prices competitive.
Where is the model number located on a Kenmore 665?
Check the interior door frame first, either the left or right edge. That's where it lives on probably 85% of these machines. If it's not there, look at the side wall of the inner tub, which you can only see with the door fully open. Grab a flashlight because that area gets shadowy fast. On really old units the sticker sometimes shifts from years of steam and moisture. It's almost never on the outside of the machine or the back, so don't go pulling it out of the cabinet until you've checked the door frame thoroughly.
Can I use Whirlpool dimensions for my Kenmore 665?
Yes, pretty much exactly. Same chassis, same mounting bracket locations, same leveling leg setup. If you're looking at a Whirlpool installation manual for a 24-inch built-in unit from a similar era, those diagrams apply to your Kenmore 665. I swapped a Kenmore 665 out for a Whirlpool WDT750SAKZ last spring and the thing dropped right in without touching the cabinetry at all. That's not always true with every brand swap, but with the 665 series it works out that way the vast majority of the time.
What do I do if the model number sticker is completely faded or missing?
A few options here. First, check if there's a second label somewhere on the tub side wall, sometimes that one's in better shape. Second, dig up your original purchase receipt or any Sears product registration you might have done. Third, the serial number alone can sometimes help narrow it down, and a Whirlpool parts rep can often decode it for you. If all else fails, bring the actual part you need to the counter and match it physically. With Whirlpool-built units there are really only a handful of variations, so you can usually figure it out that way.
Is the Kenmore 665 Elite the same size as the base models?
Yep. Same 24-inch opening, same height range, same depth. The Elite just means you've got a stainless tub, better wash arms, maybe a third rack or fancier control panel. But the cabinet cutout dimensions and the mounting points are identical. So if you're replacing a base 665 with a 665 Elite or going the other direction, you don't need to touch the cabinetry. Kenmore kept the platform consistent across the whole line specifically so retailers and customers wouldn't have to stress about fit during an upgrade.
Models Known to Experience MODEL-665-DIMENSIONS Errors
This repair applies to most Kenmore dishwashers with this error code. Common model numbers include:
665.13242K113, 665.13249K111, 665.13472N410, 665.13473N411, 665.13543N412, 665.13043K113, 665.14753N512
Last verified for technical accuracy on May 20, 2024