Kenmore 795 Refrigerator Model Identification and Parts

Quick Answer

You can find your model number on a white sticker located inside the refrigerator section, typically on the right-hand wall or the ceiling. The 795 prefix is the manufacturer code for LG, which is essential for sourcing the correct mechanical parts.

These Kenmore 795 fridges are basically LG refrigerators in a Kenmore shirt. That matters a lot when you're trying to fix one, because if you order parts searching for 'Kenmore' without the full model number, you'll get the wrong stuff or blank stares. The complete model number, every single digit, determines whether a control board or evaporator fan from 2019 actually fits yours. Don't skip this step.

KenmoreRefrigeratorSeverity: low

Time to Fix

5–10 min

Difficulty

beginner

Parts Cost

$0 (no parts needed)

Tools Needed

Flashlight (any style, phone flashlight works fine), Smartphone with camera

Kenmore 795 Refrigerator Model Identification and Parts

OK so here's the deal with the 795 series. Sears had LG build these under the Kenmore name, and LG didn't cut corners. These are solid machines. But because of that, every part you order needs to match the LG equivalent, not a generic Kenmore one. I've watched guys order the wrong evaporator fan motor three times in a row because they searched 'Kenmore refrigerator fan' instead of cross-referencing the actual full model number. That sticker inside your fridge is the only thing that matters when you're trying to fix one of these.

Common Causes

Your refrigerator is throwing an error code and you need the exact model number to pull up the right diagnostic procedure for your specific production revision, because LG changed components mid-run on these.
You're ordering a replacement part online and the parts site won't show you compatible options until you enter the full model number, which means the 795 prefix alone isn't enough.
A repair tech is coming out and asked you to have the model and serial ready so they can pre-order the right control board or sensor before the visit, saving a second trip.
The fridge came with the house and you have no idea what year it was made, what revision it is, or what diagnostic platform it runs on.
You're trying to figure out if your unit is covered under any Kenmore or LG extended warranty or recall program, which requires the exact model and serial.

Symptoms You May Notice

Fridge is making a noise you don't recognize and you need to look up what's normal for your specific 795 model revision before assuming something's broken.
Water's pooling under the vegetable drawer and you want to cross-reference the drain pan design for your revision, since LG updated it partway through the 795 production run.
Display is showing a code like Er FF or Er rF and you need to confirm this is actually an LG-platform unit before you start debugging the wrong way.
A tech told you the control board is bad and gave you a part number that doesn't match anything you can find, which usually means you're looking at the wrong model revision.

Tools Required for Diagnosis

Flashlight (any style, phone flashlight works fine)Smartphone with cameraPen and paper as backup if camera won't focus

Diagnostic Checklist

Follow these steps in order. We start with the easiest external fixes before opening up the machine.

Frequently Asked Questions

Where is the model number on a Kenmore 795 refrigerator?

It's on a sticker inside the fresh food compartment, not on the back of the machine or under the kickplate at the bottom. Check the upper right-hand wall first, that's where it is probably 75% of the time. If it's not there, look at the ceiling near the front edge. A small percentage of models have it on the door frame where the gasket seals against the cabinet. Don't waste time checking the back panel or the base grille on these, I've genuinely never found one there in 15+ years of working on them.

What does the 795 prefix mean on a Kenmore fridge?

The 795 code tells you LG built this fridge for Sears under the Kenmore brand. That's not just trivia, it changes everything about how you fix it. You need LG's diagnostic codes, LG's part numbers, LG's service procedures. I've watched homeowners waste $150 in wrong parts because they searched 'Kenmore bottom freezer compressor' instead of the LG equivalent. If your fridge starts with 795, treat it like an LG when you're ordering parts. You'll save yourself a ton of headache and probably a week of waiting for returns.

Why are there so many digits in the Kenmore 795 model number?

The full model number breaks down into three chunks. Take something like 795.72053.110. The 795 is the manufacturer code, meaning LG. The middle section is the base model and configuration, basically which physical fridge it is. Those last three digits are the revision number and they actually matter more than most people think. LG updated control boards, evaporator designs, and compressor types across production runs without changing the base model. I've seen two fridges with nearly identical model numbers need completely different control boards because one was a .110 revision and the other was a .310.

Can I use LG parts on my Kenmore 795 refrigerator?

Yes, and honestly you should be searching for LG parts first because you'll find better prices and more supplier options. Since LG manufactured these units, the internal components are often identical to their own branded models. The trick is cross-referencing the full Kenmore model number against LG's part catalog. Sites like RepairClinic and PartSelect both support this. Just don't assume every LG bottom freezer part will fit because the revision suffix matters for things like ice maker assemblies and control boards. Always match the full number, not just the base model.

My model number tag is worn off. How can I find it?

First check the original owner's manual, the model number is usually printed right on the cover or the first inside page. If you don't have that, look for the yellow EnergyGuide sticker, which sometimes survives when the white model tag doesn't. If both are gone, there's sometimes a barcode label on the main control board itself, which is behind the rear access panel at the bottom back of the unit. That's a pain to get to but it's there on most of these. You can also try calling Sears Parts Direct with just the serial number if you can find that somewhere, sometimes they can pull the model from it.

How do I know which LG model number corresponds to my Kenmore 795?

The easiest way is to search the full Kenmore model number on PartSelect or AppliancePartsPros. Both sites will show you the matching LG model number right in the listing. Usually the LG equivalent drops the 795 prefix and uses a different format like LFX31925ST. Once you have that LG number, you've got access to LG's full service documentation and a much bigger parts market. Write both numbers down once you find the cross-reference, you'll use them both.

Models Known to Experience MODEL-795-LOOKUP Errors

This repair applies to most Kenmore refrigerators with this error code. Common model numbers include:

795.72053.110, 795.76203.901, 795.71303.012, 795.74023.411, 795.70323.310, 795.51832.010, 795.69313.410, 795.78309.800

Written by

Mike Sullivan

Lead Appliance Repair Technician · 20 years experience

Last verified for technical accuracy on March 17, 2026